|
Article:
Diagnosing Paper Jams in HP Laser Printers by: Donald Broda There are many things that can cause paper jams in HP printers, and diagnoses vary from one model to the next. In this article I will discuss some of the most common causes of printer jams and possible solutions. Where is the paper jamming? When you answer this question you are close to solving the problem. 1. If the printer will not pick up paper from tray two or three there are several causes. Try using a lower weight paper. HP does not recommend printing a higher weight than 20lbs from and tray but tray one. If this does not work the paper rollers probably need to be changed. These come with every maintenance kit, but most end users do not change them, they just change the fuser. If you do not have rollers available try cleaning them with a lint free cloth and wipe away any paper dust or other debris. 2. The paper is picked up from the tray but does not make it to the toner cartridge. Typically this is the paper feed assembly or the registration assembly. These are not easily replaced and I suggest consulting a professional. 3. The paper gets to the toner cartridge and then jams. Try replacing the toner cartridge. If you have a newer model printer (most HP models) check to make sure that the toner transfer bar is not stuck in an upright position. Check for debris. If there is debris in the paper path this can cause jamming. Debris can be a torn piece of paper, a stable or just a build up of paper dust. DO NOT touch the roller. It will hold the oil form your skin and cause print defects. 4. The paper enters the fuser, but gets jammed inside. Unfortunately, the fuser will probably have to be replaced, but check for any debris on the rollers before replacing. Also clean the paper path with a lint free cloth. DO NOT touch the rollers. They will hold the oil form your skin. This does not cover all possible causes, only the most common. Donald Broda Senior Technician Specialist www.brtoner.com donald@brtoner.com About The Author Donald Broda has worked in the laser printer industry since 1999. In that time he has been involved in remanufacturing toner cartridges, quality control, and service of Hewlett Packard Laser Printers. Please do not reprint any articles without author's permission. Donald can be reached at donald@brtoner.com and you can visit his company website at www.brtoner.com. This article was posted on February '11
|
